Відео

How it is possible that it has stable flight? Is the controller that "smart"? Can I have my own plane model and use the controller without any previous configuration/programming?

Thanks guys

?

Still one of my favorite birds. Had two of the first kits you offered, that where original signed by David. 🙂

Not sure if I am missing something.. I do not see the article.

Landing gear with steerable nose wheel?

Link to speed build kit???

My FT Viggen has been flying for 5 odd years Put upper and lower KF airfoils on it (KF4's) for strength and higher wing stability Also used BBQ. Skewers on canard leading and trying edges into the fuselage for more strength there

During the covid shutdown, I built 21 of the flight test aircrafts. Spent close to a thousand dollars on motors, battery's, servos, props, dollar store foam board, 2 controllers and all the other stuff needed to enjoy this hobby. Never flew the first one. I have several boxes sitting in the shed. Maybe one day I'll get back into it.

HELL YEAHHHH.

ok I guess I am lost... Is there no new speed build kit Viggen V2 or article?

I have a $3,000, 3 ft by 4 ft CNC CO2 laser cutter because of this airplane. I can't wait to get my hands on the plans for the v2.

oh man! I see a new Thrust Vectoring project in my future! lol

Sweet!!!

I have scratch built two Viggen, love this plane

You forgot to add the article.

OHH this is a good nostalgia-pay-back vid! I remember when i start at this hobby, learning many things and some English across the way also!

Hello old friend

Where's the article with updates?

Its been so long 🥺i miss you guyss. Started watching you when i was in elementary and now im on my last year of college! I was there when the original viggen was released and man has it been a while. edit: I still have my original viggen in my attic!

Ye olde flite test was awesome

no article :(

The Swede is back! Heck yeah! :D

It looks so good!🛩️🔥

Me gustaría ver los plano

1:17:34 tail

Could this be scaled down to a smaller size to allow for indoor flying?

It would be nice if Josh didn't cover up 90 percent of the bends and the servos so you get a look at what is happening.

Hey it's a great video also if you can make a video on the squid stick if you have it because it is a great device but when I upgrade the radio expressLRS I can't connect the stick no more. Anyways thank you.

Awsome video. Good job

Lego blocks is a good way to put it thats the way i think of alot of stuff lol

I GOT A SET OF THEM & THEY FLY REALY NICE🤩

I have just bought a micro Draco 800, and I am new to all of this I have a zorro radiomaster can you tell me how to bind these when I go to multi I put spectrum what do I put in next please John woodfine Australia

I think this page and content came up as an ad. I moved up to oregon and i'm enjoying the nature. now I am very curious about these. IS this maybe a good one for beginners? It looks pretty forgiving. I am fascinated by this as a hobby. How are these decorated? a special ... paint or decals or a wrap? I am so out touch, so you can run some VR goggles and fly POV ? that... would be awesome. Is it listed how much weight it can pull / carry? like a load?

Thanks from Germany, Very clear and helpful! 🇩🇪👍

❤❤❤ ⚘️🌷⚘️🙏🙏😊😊😊👍👍👍

Thanks a lot .

All fine, but where is Link to Plans for that? As far as I remember, plans had to be available for free always. Hmmmm

Sand me plan of this plane

I have an aura 8 and a SPM4651T I have the premade connector with servo and 4 pin connectors. I just created a new model on my DX8 G2 but when I go to telemetry I do not get ‘TEXT GEN’ to appear in the options what do I do now?

longest youtube video i've ever watched 😅

On my build the motor mount assembly was 1-2mm to wide to fit into the cowling. I had to modify/ reduce the mount width and the 3D printed firewall by 2 mm. Now it fits with some friction only.

After applying the livery, was it still under 250 grams?

The r Servo body's for rudder and elevator conflict with the vertical stabilizer I prefit them to leave marks to cut some paper/foam on the stab to allow clearence

I've got that identycal model for more than ten years now, never had any problem!

Yikes I 3 hardwood pieces ~12" x 1" x 1/8" left over after completing the plane. Where did I mess up? A 4 hour video is a long rewatch.

The weeding process is an interesting challenge. The glue bonding the paper to foam is so good that I found it necessary to run my razor blade between the paper and foam to give a smooth clean channel. The laser cuts are precision and beautiful.

I am very concerned there is no spar tying the wing halves together. Positive g loads have shear panels in the fuselage to transfer the load but negative g loads only have the butt glue joint at the wing center section. I'm adding a sub spar piece to tie the long wood braces together

The large step in front of the aileron from the extra fold adds strength to the trailing edge but creates turbulence for the aileron and dramatically reduces its effectiveness. I had a flying wing I built with dollar tree foam that had that same step in front of the elevon. The maiden flight was totally uncontrollable. An engineer from the Lockheed skunk works told me what was wrong and how to fix it . I field cut a bevel into the step essentially eliminating it. The Result, it flew perfectly.

do you have the free Plaines